For Sale / Wanted
If you have any relevant item for SALE or WANTED we will consider posting it here.
This is subject to approval & on the understanding that the MSRVS Ltd. will not be held liable in any way whatsoever for offering this service.
Buyers are entirely responsible for checking all that is offered is of good order and appropriate for their needs.
Members can advertise FREE, we ask non-members for a fee of £10 to advertise here and in our society newsletter.
It makes sense to join the Club as you will get one years benefits and your advertising for Free!
Note, pictures save a thousand words and often make a sale that much quicker.
Please, if you do sell an item successfully, let us know so we can remove the item from this page.
This is subject to approval & on the understanding that the MSRVS Ltd. will not be held liable in any way whatsoever for offering this service.
Buyers are entirely responsible for checking all that is offered is of good order and appropriate for their needs.
Members can advertise FREE, we ask non-members for a fee of £10 to advertise here and in our society newsletter.
It makes sense to join the Club as you will get one years benefits and your advertising for Free!
Note, pictures save a thousand words and often make a sale that much quicker.
Please, if you do sell an item successfully, let us know so we can remove the item from this page.
r sale
Workshop Equipment (noted below)
Also see pictures.
Harrison T300 long-bed lathe, metric, 3ph.
All-geared head. Approx. 110mm above saddle, 1m between centres.
4-jaw chuck, 450mm dia faceplate, Bernerd collet-chuck set 1/16 - 1-1/2", fixed steady, 'Multifix' Type B QCTP with 7 holders. Assorted tools.
Overall size approx. 1.9m X 0.7 wide X 1.3, high, weight about 650kg. Also see the lathes.co site.
Very clean condition; offers on £3000 with all tooling.
Metba MB0 Horizontal / Vertical mill. Metric, 3ph.
A Spanish industrial-quality machine taking no more room than a Myford VMC, so a reasonable size for the larger-scale model-engineering; and using readily-available INT tooling. All-geared with 15-500rpm on the horizontal spindle. Powered feeds including vertical, as far as I can tell. Has: horizontal over-arm and bracket, vertical head with quill, 600mm X 200mm working-surface table; vice, some tooling including an INT-MT drill adaptor, and a boring-head. Also some horiz. cutters apparently unused (still in wax).
Will include a rather basic dividing-head of unknown make (from a kit?) and with only one division-plate found.
Envelope approx. W 1m X Depth 1.1m X 1.7m to top of vertical head (in place). Those depicted on lathes co. seem more modern versions, but are basically similar.
Appears in good condition; I was tempted to buy it myself to replace my separate Myford and Denbigh mills!
Offers on £1500.
Meddings Bench-Drill, Type 25-3? Model M2? (access to labels difficult)
Appears 3ph judging by the workshop wiring, but easy to convert. A 1ph motor may be available.
Single-range belt-drive.
Table 12 X 11 inch working surface. Usual oopsies arc, some surface rust; but I have seen far worse!
£100 ono.
Nu-Tool Bench-Drill, 1ph.
A small but still useful machine. £50ono
SIP arc-welder, 'Topweld 140', 1ph.
Plain type.
£50 ono.
Milling Vice, Abwood 6".
Generally good condition - some scarring on jaws, surface rust, but lacks handle (where do they all go?) £75 ono.
Rotary Table, 6". Make unknown! (Label long-lost)
Spindle tapped 1/2" BSW below a 3/4" dia female register. Its 4 home-made T-nuts have 2 sets of holes, one tapped M4 to hold a Myford chuck adaptor flange. No quick-release. Some scarring but serviceable.
£50 ono.
Drill-vice, 5" W X 6.5" Make: a special!
This beautifully-made drilling-machine vice is stamped, "Made by J.A. Beszelzan, Dec.1972", unknown to us but possibly an apprentice or a tool-maker. Some rusting unfortunately but...
£40 ono.
NB I have not tried operating the machines, which are in generally very clean condition but have not been used for perhaps 8 years due to the late owner's illness. They are all fed from a single 3-phase ring-main on a massive inverter / rotary-converter set, so you will need buy modern inverters for them.
Contact
Nigel Graham.
01305-772711
n_graham@btinternet.com
Workshop Equipment (noted below)
Also see pictures.
Harrison T300 long-bed lathe, metric, 3ph.
All-geared head. Approx. 110mm above saddle, 1m between centres.
4-jaw chuck, 450mm dia faceplate, Bernerd collet-chuck set 1/16 - 1-1/2", fixed steady, 'Multifix' Type B QCTP with 7 holders. Assorted tools.
Overall size approx. 1.9m X 0.7 wide X 1.3, high, weight about 650kg. Also see the lathes.co site.
Very clean condition; offers on £3000 with all tooling.
Metba MB0 Horizontal / Vertical mill. Metric, 3ph.
A Spanish industrial-quality machine taking no more room than a Myford VMC, so a reasonable size for the larger-scale model-engineering; and using readily-available INT tooling. All-geared with 15-500rpm on the horizontal spindle. Powered feeds including vertical, as far as I can tell. Has: horizontal over-arm and bracket, vertical head with quill, 600mm X 200mm working-surface table; vice, some tooling including an INT-MT drill adaptor, and a boring-head. Also some horiz. cutters apparently unused (still in wax).
Will include a rather basic dividing-head of unknown make (from a kit?) and with only one division-plate found.
Envelope approx. W 1m X Depth 1.1m X 1.7m to top of vertical head (in place). Those depicted on lathes co. seem more modern versions, but are basically similar.
Appears in good condition; I was tempted to buy it myself to replace my separate Myford and Denbigh mills!
Offers on £1500.
Meddings Bench-Drill, Type 25-3? Model M2? (access to labels difficult)
Appears 3ph judging by the workshop wiring, but easy to convert. A 1ph motor may be available.
Single-range belt-drive.
Table 12 X 11 inch working surface. Usual oopsies arc, some surface rust; but I have seen far worse!
£100 ono.
Nu-Tool Bench-Drill, 1ph.
A small but still useful machine. £50ono
SIP arc-welder, 'Topweld 140', 1ph.
Plain type.
£50 ono.
Milling Vice, Abwood 6".
Generally good condition - some scarring on jaws, surface rust, but lacks handle (where do they all go?) £75 ono.
Rotary Table, 6". Make unknown! (Label long-lost)
Spindle tapped 1/2" BSW below a 3/4" dia female register. Its 4 home-made T-nuts have 2 sets of holes, one tapped M4 to hold a Myford chuck adaptor flange. No quick-release. Some scarring but serviceable.
£50 ono.
Drill-vice, 5" W X 6.5" Make: a special!
This beautifully-made drilling-machine vice is stamped, "Made by J.A. Beszelzan, Dec.1972", unknown to us but possibly an apprentice or a tool-maker. Some rusting unfortunately but...
£40 ono.
NB I have not tried operating the machines, which are in generally very clean condition but have not been used for perhaps 8 years due to the late owner's illness. They are all fed from a single 3-phase ring-main on a massive inverter / rotary-converter set, so you will need buy modern inverters for them.
Contact
Nigel Graham.
01305-772711
n_graham@btinternet.com
Allchin 'Royal Chester' 3" scale Traction engine for Sale
Due to personal circumstances I am offering this engine for Sale to reduce my fleet to just the one.
It is all in good working order, and was last run some 8 weeks ago. It comes with a 4 wheel driving trolley.
It is NOT an exhibition engine, but a good 'working' engine- easy to drive and maintain.
I have owned it the last 11 years, and it was owned by an MSRVS member for some years prior to that.
Built around 1996, it has a steel boiler [80psi], and was fitted with new tubes in 2010. It has always had boiler treatment in ever since.
Some of the main working parts have been replaced over last 11 years due to general wear and tear.
Engine pump, injector, and hand pump for water.
What it does need now is repainting, I have all the paint available, but no inclination to do it!
I also have all the boiler paperwork and books, but it has no boiler test currently due to the pandemic and also my distance from any test site.
That said it, holds pressure and blows off correctly- it should pass with no bother.
I will gladly supply any more details or more photos on requests. if you wish to visit the engine to view i will gladly steam it up and demonstrate [ as best i can in my smallish garden].
I live in Narberth, Pembrokeshire, which is a long trek, but easy to find once here, and you will be made welcome.
Asking £6,000 as no boiler ticket and a long to travel. A bargain at that price as I need to sell it soon . But no offers below that price, or dealers, please.
Please contact Robin for more details ,Phone 07770394267 or email
robin@daviesrowtech.co.uk
Due to personal circumstances I am offering this engine for Sale to reduce my fleet to just the one.
It is all in good working order, and was last run some 8 weeks ago. It comes with a 4 wheel driving trolley.
It is NOT an exhibition engine, but a good 'working' engine- easy to drive and maintain.
I have owned it the last 11 years, and it was owned by an MSRVS member for some years prior to that.
Built around 1996, it has a steel boiler [80psi], and was fitted with new tubes in 2010. It has always had boiler treatment in ever since.
Some of the main working parts have been replaced over last 11 years due to general wear and tear.
Engine pump, injector, and hand pump for water.
What it does need now is repainting, I have all the paint available, but no inclination to do it!
I also have all the boiler paperwork and books, but it has no boiler test currently due to the pandemic and also my distance from any test site.
That said it, holds pressure and blows off correctly- it should pass with no bother.
I will gladly supply any more details or more photos on requests. if you wish to visit the engine to view i will gladly steam it up and demonstrate [ as best i can in my smallish garden].
I live in Narberth, Pembrokeshire, which is a long trek, but easy to find once here, and you will be made welcome.
Asking £6,000 as no boiler ticket and a long to travel. A bargain at that price as I need to sell it soon . But no offers below that price, or dealers, please.
Please contact Robin for more details ,Phone 07770394267 or email
robin@daviesrowtech.co.uk
